Eos (1F7) V6-3.2L (BUB) (2008)
^
Attach tools as depicted in illustration.
1. Nut 3346/3
2. Press piece 3346
3. Bonded rubber bushing
4. Fitting sleeve 3378
5. Nut, commercially available
6. Spindle 3346/2
^
Pull in bonded rubber bushing by turning spindle.
Note:
^
Do not use lubricant!
^
Carefully install bearing to avoid canting.
^
Install cover plate.
^
Install wheel bearing/wheel hub unit.
Only install bolted connections on wheel bearing housing if dimension "a" is reached!
^
Tighten bolt - arrow - for lower transverse link - 1 -.
^
Install coil spring.
^
Install brake disc.
^
Install brake carrier with brake caliper.
^
Install wheel and tighten.
Tightening Specifications
Wheel Bearing Housing
Wheel Bearing Housing
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G. 1332