Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1542003.png)
Removing
^
Remove wheel.
^
Remove coil spring.
^
Remove wheel bearing/wheel hub unit.
^
Remove cover plate.
^
Remove ABS wheel speed sensor from wheel bearing housing.
^
Remove bolt - arrow -.
^
Remove bolt for tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 - from wheel bearing housing - 4 -.
^
Remove coupling rod - arrow - from wheel bearing housing.
^
Hold wheel bearing housing firmly and remove bolts - arrows -.
^
Pull coupling rod - 1 - out of longitudinal control arm.
Installing
