Eos (1F7) V6-3.2L (BUB) (2008)
29
Bolt
‹› M12 x 1.5 x 110
‹› 70 Nm + 180° turn
‹› Always replace after removal.
‹› Tighten only in curb weight position. Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] See: Wheel Bearing/Service and
Repair/Procedures.
30
Nut
‹› 65 Nm
‹› When tightening, counterhold on hex socket head of joint bolt.
‹› Self-locking.
‹› Always replace after removal.
31
Stabilizer Bar
‹› Various versions
‹› Removing and installing, refer to => [ Stabilizer Bar ] See: Front Suspension/Stabilizer Bar.
Identifying the Pendulum Support Bonded Rubber Bushing
‹› There are two different versions of the pendulum support bonded rubber bushing: the T version - I - and the V version - II -.
I
The corners on the inner core - 1 - face toward the opening for the pendulum support - arrow - (T version).
II
The corners on the inner core - 2 - face away from the opening for the pendulum support - arrow - (V version).
Stabilizer Bar
Stabilizer Bar