Eos (1F7) V6-3.2L (BUB) (2008)
-
Loosen nut of track rod ball joint on both sides, but do not unscrew yet.
‹› To protect thread, screw nut on pin a few turns.
-
Press off tie rod end from wheel bearing housing using ( 3287A).
-
Secure subframe with brackets. Refer to => [ Subframe and Consoles, Securing ] See: Subframe/Front Subframe/Service and
Repair/Procedures/Front Suspension.
-
Remove the stabilizer from the subframe - 11 and 16 -.