Eos (1F7) V6-3.2L (BUB) (2008)
-
Thread stabilizer bar toward left out of subframe.
‹› When threading out stabilizer bar, ensure subframe surface is not damaged. Correct any possible paint damage.
Installing
-
Thread stabilizer bar from left side out into subframe.
‹› When threading in stabilizer bar, ensure subframe surface is not damaged. Correct any possible paint damage.
-
Tighten bolts - arrows - for stabilizer clamp uniformly.
-
Install the coupling rod - 2 - in the stabilizer bar and tighten the nut - 1 -.