Eos (1F7) V6-3.2L (BUB) (2008)
1
Stabilizer Bar
‹› Be aware of the various suspension versions, refer to => [ Vehicle Data Label ] See: Alignment/Description and Operation.
‹› Removing and installing, refer to => [ Stabilizer Bar ] See: Rear Suspension/Stabilizer Bar.
2
Rubber Mount
‹› Replace mounts always on both sides of vehicle.
3
Clamp
4
Bolt
‹› 25 Nm + 45° turn
‹› Tighten uniformly.
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Wheel Bearing, Lifting to Curb Weight Position ] See: Wheel
Bearing/Service and Repair/Procedures.
5
Wheel Bearing Housing
6
Nut
‹› 45 Nm
‹› Self-locking