Eos (1F7) V6-3.2L (BUB) (2008)
-
Place for example a block of wood - 1 - between (V.A.G 1383 A) and subframe.
-
Remove the bolts - 4 - and - 5 - and lower the subframe maximum 10 cm.
‹› Be careful not to overstretch the electrical wire for the steering.
Installing
Installation is performed in the reverse order of removal.
-
Install lower noise insulation. Refer to => Body Exterior
50 Description and Operation.
‹› Make sure that the ball joint boot is not damaged or twisted.
Tightening Specifications