Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1586003.png)
^
Remove hex bolts - arrows - for upper strut mounting and remove suspension strut.
Installing
Installation position of spring retainer
^
Insert suspension strut, one of the two markings - arrows - must point in direction of travel when doing this.
Tighten hex bolts - arrows - for upper strut mount.
^
Install plenum chamber cover.
^
Install wiper arms.
^
Secure engine/transmission jack V.A.G. 1383 A with wheel hub support T10149 to wheel hub using a wheel bolt.
CAUTION!
^
Do not lift or lower vehicle when the engine/transmission jack V.A.G. 1383 A stands below the vehicle. Vehicle could slip off lift.
