Eos (1F7) V6-3.2L (BUB) (2008)
1
Lower Spring Support
‹› Spring end rotated up to stop.
2
Assembly Aid
‹› Must not be used after removal.
3
Coil Spring
‹› Note different suspension versions, refer to => [ Vehicle Data Label ] See: Alignment/Description and Operation.
‹› Removing and installing, refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Removal and Replacement/Coil
Spring
4
Upper Spring Support
5
Bolt
‹› M14 x 1.5 x 70
‹› 180 Nm
6
Bolt
‹› 50 Nm + 45° turn
‹› Always replace after removal.
7
Shock Absorber