Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1589001.png)
Trailing Arm Bushing: Service and Repair
Trailing Arm Bonded Rubber Bushing
Special tools, testers and auxiliary items required
‹› Assembly tool (T10230)
‹› Installation device (3372)
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
Bonded Rubber Bushing, Pressing Out
-
Remove trailing arm. Refer to => [ Trailing Arm with Mounting Bracket ] See: Service and Repair/Removal and Replacement/Rear Suspension.
-
Clamp longitudinal control arm into vise so that mounting bracket - 1 - makes contact at vise - arrow -.
-
Remove bolt - 2 -.
-
Install tools as shown in the illustration.
