Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1041001.png)
Differential Output Shaft: Removal and Replacement
Stub Shaft Assembly Overview
Stub Shaft Assembly Overview
‹› The stub shaft is disassembled only for cleaning.
1
Bolt
‹› Do not remove the bolts on both sides at the same time.
‹› 30 Nm.
‹› Always replace.
2
Stub Shaft
3
Protective Ring
‹› Removing and Installing, refer to => [ Protective Ring Removing and Installing ]
4
Spring
5
Thrust Washer
6
Tapered Ring
7
Securing Ring
