Eos (1F7) V6-3.2L (BUB) (2008)
Shifter A/T: Adjustments
Selector Lever Cable, Adjusting
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1331)
Selector lever cable must always be adjusted if:
‹› Selector lever cable was removed from transmission.
‹› Engine and/or transmission were removed and installed.
‹› Parts of engine mount were removed and installed.
‹› Cable or shift mechanism were removed and installed.
‹› Engine/transmission positions were changed, e.g. installed free of tension.
Adjusting
-
Shift selector lever to the "P" position.
Lever on transmission must be pressed all the way back.
If there is any uncertainty:
-
Pull lever all the way forward.
-
Press lever back.
"P" is in the Second Detent.
-
Install cable with loosened adjustment bolt - arrow - and new lock washers - A - and - B -.