Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1074001.png)
Pilot Bearing: Service and Repair
Needle Bearings, Removing from Crankshaft and Installing
Only for vehicles equipped with DSG
Special tools, testers and auxiliary items required
^
Puller T10055 with adapter T10055/3
^
Centering Mandrel 3176 or Drift VW 207 C
^
Puller, e.g. Kukko 21/2
Removing
^
Remove with standard puller, e.g. Kukko 21/2 -arrow-, Adapter T10055/3 and Puller T10055.
Installing
Note:
^
Side of needle bearing with writing on it must be readable when installed.
^
Drive in using drift VW 207 C or centering mandrel 3176.
Installation depth dimension - a - = 1.5 mm
