Eos (1F7) V6-3.2L (BUB) (2008)
Constant Velocity Joint: Service and Repair
Drive Axle With CV Joint VL90 and VL100
Drive Axle with CV Joint VL90 and VL100
Special tools, testers and auxiliary items required
^
Thrust plate VW 401
^
Thrust plate VW 402
^
Punch VW 408 A
^
Punch VW 411
^
Sleeve VW 416 B
^
Thrust pad VW 447 H
^
Circlip pliers VW 161 A
^
Torque Wrench V.A.G. 1331
^
Torque Wrench V.A.G. 1332
^
CV joint boot clamp tool V.A.G. 1682
^
Assembly tool T10065
Disassembling
Removing outer constant velocity joint
^
Secure axle shaft with protective covers in vise clamp.
^
Fold back boot.
^
Drive CV joint from drive axle using a drift - A -.
Drive must be applied exactly on star of constant velocity joint.
Driving joint on
^
Drive onto shaft with plastic hammer until securing ring engages.
^
Remove securing ring.
^
Remove both clamps and slide CV boot toward outer joint.
Pressing off inner constant velocity joint