Eos (1F7) V6-3.2L (BUB) (2008)
‹› Always replace after removal.
15
Drive Axle
‹› Removing and installing:
‹› Refer to => [ Drive Axle with CV Joint ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front Suspension/Drive Axle
With CV Joint.
‹› Refer to => [ Left Drive Axle with Mounted CV Joint ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front
Suspension/Left Drive Axle With Mounted CV Joint.
‹› Refer to => [ Right Drive Axle with Mounted CV Joint ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front
Suspension/Right Drive Axle With Mounted CV Joint.
‹› Refer to => [ Drive Axle with Tripod Joint AAR2600i ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Drive Axle
With Tripod Joint AAR2600i.
‹› Refer to => [ Drive Axle with Tripod Joint AAR3300i ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Drive Axle
With Tripod Joint AAR3300i.
16
Nut
‹› M12 x 1.5 x 80
‹› 70 Nm + 90° turn
‹› Self-locking
‹› Always replace after removal.
Wheel Bearing Housing
Wheel Bearing Housing
Special tools, testers and auxiliary items required
‹› Ball joint puller (3287A)
‹› Torque wrench (V.A.G 1332)
‹› Engine/transmission jack (V.A.G 1383 A)
‹› Angle wrench (V.A.G 1756)
‹› Spreader (3424)
Removing
-
Loosen drive axle bolt to wheel hub:
‹› Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and Repair/Removal
and Replacement.
‹› Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and
Repair/Procedures.
‹› Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.
-
Remove wheel.
-
Remove brake caliper and engage on body with wire.
-
Remove ABS wheel speed sensor.