Eos (1F7) V6-3.2L (BUB) (2008)
Differential Output Shaft: Service and Repair
Right Stub/Flange Shaft and Seal
Right Stub/Flange Shaft and Seal
Special tools, testers and auxiliary items required
‹› Pressure Piece (3377)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Torque Wrench (40-200 Nm) (V.A.G 1332)
‹› Sealing Grease (G 052 128 A1)
‹› Grease (G 052 735)
Removing
-
Remove the right wheel.
-
Remove the noise insulation.
-
Remove the right drive axle.
Vehicles with a Intermediate Shaft
-
After removing the right drive axle - A -, remove the intermediate shaft to mounting bracket bolts - arrows - and pull off from the transmission
stub shaft.
Continuation for All Vehicles
-
Place appropriate receptacle underneath the transmission.
-
Remove the bolt - arrow - for the stub or flange shaft.