volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Selector Mechanism Checking, Through 02.2009|Page 3768 > < Procedures|Page 3762
Page 1
background image

Shift Cable: Testing and Inspection
Selector Mechanism Checking, Through 02.2009

Selector Mechanism Checking, through 02.2009

Starter must not be able to be operated in selector lever positions " R", "D" and "S".

For speeds exceeding 5 km/h and shifting into selector lever position " N", the shift lock solenoid must not engage to lock the selector lever. Selector
lever can be shifted into driving gear.

For speeds below 5 km/h (almost a stand still) and shifting into selector lever position "N", the shift lock solenoid must only engage after
approximately 1 second. Selector lever can only be shifted out of position " N" with the brake pedal pressed.

Selector Lever in "P" Position and Ignition Turned On:

‹› If the brake pedal is not pressed:

Selector lever is locked and cannot be shifted out of position " P" with the button pressed. Selector lever is blocked by selector lever lock solenoid.

‹› If the brake pedal is pressed:

Selector lever lock solenoid releases selector lever. Selecting a driving mode is possible. Shift selector lever slowly through from " P" to "S"; while
doing this, check whether the display of the selector lever position in the instrument panel insert matches the actual selector lever position.

Selector Lever in "N" Position and Ignition Turned On:

‹› If the brake pedal is not pressed:

Selector lever is locked and cannot be shifted out of the " P" position with the button pressed. Selector lever is blocked by selector lever lock solenoid.

‹› If the brake pedal is pressed:

Selector lever lock solenoid releases selector lever. Selecting a driving mode is possible.

Selector Lever in "Tiptronic" Position

‹› Move selector lever into Tiptronic gate:

The illuminated "D" in the cover must go out. The " +" and "-" must come on.

The selector lever position display in the instrument cluster must change from "P R N D S" to "6 5 4 3 2 1" when the selector lever is moved into the
Tiptronic gate.

Ignition and Lights Turned On

The appropriate symbol is being lit up in shift mechanism cover.

Transmission Range (TR) Display

Simultaneous lighting of all segments of the TR selector lever display indicates transmission is in emergency running mode.

Selector Mechanism Checking, Through 02.2009|Page 3768 > < Procedures|Page 3762