Eos (1F7) V6-3.2L (BUB) (2008)
-
Install the coolant hoses to the transmission oil cooler and remove the (3094).
-
Insert the new oil filter with the seat - arrow - facing downward and tighten the housing to 20 Nm.
-
After performing repairs, the filter does not need to be changed again when filling with oil.
-
Install the battery and battery tray.
-
Check the coolant level and top off the coolant if necessary.
-
After repairing, fill the oil without replacing the filter. Refer to => [ Oil Filter, Changing and Oil Level, Adjusting ] See: Automatic
Transmission/Transaxle/Fluid Filter - A/T/Service and Repair/Oil Filter, Changing and Oil Level, Adjusting.
CAUTION!
Do not start the engine during coolant level testing if the transmission fluid has not been filled yet.