Eos (1F7) V6-3.2L (BUB) (2008)
Back Window Glass: Service and Repair
Flush Bonded Window
Flush Bonded Window
Rear Window Assembly Overview
1
Rear Window
‹› Removing, refer to => [ Undamaged Rear Window ] See: Service and Repair/Removal and Replacement/Flush Bonded Windows
‹› Installing, refer to => [ Rear Window ] See: Service and Repair/Removal and Replacement/Flush Bonded Windows
2
PUR Adhesive Sealant
‹› Bead diameter: width = 6.5 mm, height = 10 mm (including residual material on window glass and window flange).
‹› Minimum curing time, refer to => [ Minimum Curing Time ] See: Service and Repair/Procedures/Flush Bonded Window/Minimum Curing
Time
3
Panel Gap Dimension
‹› from window edge to rear window frame
‹› Set a constant dimension of 2.5 mm using (3371)
4
Height Dimension
‹› From window surface to upper edge of rear window frame