Eos (1F7) V6-3.2L (BUB) (2008)
‹› The installation position is reached when the holes in the bracket and in the mount align.
-
Insert the grooved pin - 3 - in the hole and drive it in with a hammer.
-
Attach the felt to the specified location on the mount.
Wind Screen Locking Pins
Wind Screen Locking Pins
‹› A repair to the cloth cover is not possible. In this case the wind deflector should be replaced.
Removing
-
Slide the cap - 1 - outward out of the mounts.
-
Remove the screw - 1 - (1.9 to 2.4 Nm) and remove the spring - 2 -.