Eos (1F7) V6-3.2L (BUB) (2008)
Wiper Motor: Removal and Replacement
Windshield Wiper Motor
Requirement
-
Wiper frame with linkage and wiper motor removed
-
Alternating Park Position of wiper motor (APP function) must be deactivated.
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G 1331
-
Pry lever 80-200
Removing
NOTE: Alternating Park Position of wiper motor (APP function) must be deactivated.
-
Pry off ball head - arrow - of linkage - 1 - from motor crank using pry lever 80-200
-
Remove mounting nut - 1 -.
-
Remove motor crank - 2 - from wiper motor shaft.
-
Remove mounting bolts - arrows - and remove wiper motor with control module out of wiper frame.
Installing
-
Insert wiper motor with control module into wiper frame and secure it with mounting bolts - arrows -.
-
Tighten threaded connections to 8 Nm.
Overview of tightening torques.