Eurovan L5-2459cc 2.5L SOHC (1992)
-
Mark holes -1- and -2-, drill:
a = 22 mm (0.86 in.)
b = 29 mm (1.14 in.)
c = 21 mm (0.82 in.)
1 = 16 mm dia. (0.62 in.)
2 = 8.1 mm dia. (0.31 in.)
-
Deburr holes and apply corrosion protection as necessary.
NOTE: The following method is suitable for paint damage in non-visible areas: coat twice (wet on wet) with glass/paint primer D 009 200 02 or
equivalent, drying time approx. 10 minutes.
-
Clip double clip -1- in two bottom holes.
Trim panel (single)
