volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Sliding and Tilting Glass Sunroof|Page 1891 > < Sliding and Tilting Glass Sunroof|Page 1889
Page 4
background image

15

-

Water deflector plate

16

-

Cover

17

-

Allen wrench for emergency operation

18

-

Countersunk screw

19

-

Drive motor

Sunroof Panel, Removing and Installing

Sunroof Panel, Removing And Installing

Removing

-

Remove sunroof.

-

Remove left/right nuts - 1 - and remove left/right screws - 2 - (threads are coated with locking compound, use D 185 400 A2 for repairs).

-

Pull glass cover off left/right brackets.

Installing

-

Check front gaskets - arrow - for damage and replace if necessary.

-

Press left and right bracket on sides of sunroof frame. Slide roller - 11 - in Figure N60- 0031 must lie in hinge.

-

Install glass cover on brackets and align so there is a uniform gap all around it, coat threads with locking compound D 185 400 A2 and screw glass
cover onto hinges. Tightening torque: nuts = 4.5 Nm (40 in.lb), screw = 2.5 Nm (22 in.lb).

Roof Window, Removing

Roof window, removing 

Sliding and Tilting Glass Sunroof|Page 1891 > < Sliding and Tilting Glass Sunroof|Page 1889