Eurovan L5-2459cc 2.5L SOHC (1992)
Evaporator Case: Service and Repair
Heater Box/Evaporator Housing, Removing
NOTE:
For illustration purposes, heater box/evaporator housing is shown with the instrument panel removed.
1 - Heater box/evaporator housing
2 - Rubber grommet
3 - Screws
NOTE: Plug heater core outlets to prevent coolant spills in the passenger compartment during heater box/evaporator housing removal.
Removing
-
Remove glove box
-
Remove right air duct
-
Remove air intake duct, rear (on bulkhead)
-
Remove center air outlet and center air duct (if equipped)
-
Loosen and remove heater/fresh air control cables from housing
-
Remove harness connector from fresh air blower series resistor
-
Remove footwell air outlet console and cover
-
Remove coolant hoses from heater core and plug connections
-
Loosen and remove cable at heater control valve
-
Remove screws -3-
NOTE: The lower screw is located on the bulkhead beneath the engine compartment trim.
-
Remove heater box/evaporator housing -1-