Eurovan L5-2459cc 2.5L SOHC (1992)
Ignition Switch Lock Cylinder: Service and Repair
Lock Cylinder, Removing And Installing
Removing
-
Removing steering lock housing
-
Mark steering lock housing for drilling
a
-
12 mm (.5 in.)
b
-
10 mm (.4 in.)
-
Drill steering lock housing (approx. 3 mm, (.12 in.)), until the lock cylinder spring is evident (hole depth approx. > 3 mm, (.12 in.)).
-
Using opposite end of drill compress lock spring and pull out lock cylinder.
Installing
CAUTION! The original steering lock housing must not be reinstalled.
-
Push lock cylinder into steering lock housing.
-
By slightly turning key in lock cylinder it can be pushed onto the stop.