Eurovan V6-2792cc 2.8L (AES) (1998)
-
Connect LED tester between
terminal 1 and Ground for cyl. 1 connector.
-
Operate starter.
-
LED must light up
If LED does not light up:
-
Switch ignition off.
-
Check for open circuit between 2-pin connector terminal 1 and fuel pump relay -J17- using wiring diagram.
-
wire resistance: max. 1.5 Ohms
If LED flickers for one or more cylinders:
-
Connect VAG 1598/18 Test Box to ECM wiring harness.