Eurovan V6-2800cc 2.8L (AES) (2000)
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
Will be indicated on display:
Control unit does not answer!
HELP
-
By pressing the HELP button a list of possible causes is printed out.
-
After repairing malfunctions, enter address word 56 for radio again and confirm with -Q- button.
Indicated on display:
1J0035186B Radio 0001 ->
Coding 00201 WSC 00000
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
After the HELP button is pressed, a list of the possible functions is printed out.
End Output (Function 06)
End Output (function 06)
-
Press buttons -0- and -6- to select function "End output".
Indicated on display:
Rapid data transfer
Q
06 End output
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
Help
Enter address word XX
-
Switch off ignition.
-
Disconnect VAG 1551 Scan Tool (ST).
Selectable Functions When Using VAG 1551/1552 or VAS 5051
List Of Selectable Functions
01 ......................................................................................................................................................................................... Check Control Module Version
02 .......................................................................................................................................................................................................... Check DTC Memory
03 ............................................................................................................................................................................................ Output Diagnostic Test Mode
05 ........................................................................................................................................................................................................... Erase DTC Memory
06 ......................................................................................................................................................................................................................... End Output
07 ......................................................................................................................................................................................................... Code Control Module