Eurovan V6-2800cc 2.8L (AES) (2000)
NOTE: Remove rear headliner trim, left upper B-pillar trim, right upper B-pillar trim, left C-pillar trim, right C-pillar trim.
-
Remove coat hook cover to remove Phillips screw, remove coat hook.
-
Remove Phillips screw - 2 -.
-
Unclip trim in following sequence:
-
Along molded headliner (arrow - A -)
-
Window frame (arrow - B -)
-
Rear D-pillar (arrow - C -)
-
Loosen clip - 1 -
-
Remove D-pillar trim from bottom (arrow)
-
Front D-pillar (arrow - E -)
D-pillar trim, installing
NOTE: When gluing trim in window areas (arrows - B -, - E -) unclip short sections while supporting trim from the back by hand or lever tool 80-200.
-
Install trim on bottom (arrow - D -), place in installation position and ensure correct positioning of clip - 1 - simultaneously.
-
Clip D-pillar trim into clamps on headliner (arrow - A -) and in window area (arrows - B - and - E -).
-
Ensure correct positioning of gasket (arrow - C -).
D-Pillar Trim (Vehicles With Passenger Compartment Ventilation / Air Conditioning System),
Removing and Installing
D-pillar Trim (Vehicles With Passenger Compartment Ventilation / Air Conditioning System), Removing And Installing