Eurovan V6-2800cc 2.8L (AES) (2000)
ABS Light: Adjustments
Brake light switch, adjusting
Note: Brake light switch must be removed for adjustment.
^
Remove cover, driver's side.
^
Disconnect connector from brake light switch.
^
Remove brake light switch by rotating 90° toward left.
^
Completely remove plunger of brake light switch.
^
Press down brake pedal as far as possible by hand.
^
Guide brake light switch through assembly hole and re-install by rotating 90° toward right.
^
Release brake pedal.
After adjusting brake light switch, check whether brake pedal is in end position (released position).
^
Connect connector for brake light switch.
^
Operate brake pedal.
-
brake lights light up.
^
Remove foot from brake pedal.
-
brake lights must not light up.
^
Install cover, driver's side.