volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Brake Pedal Assy|Specifications|Page 4126 > < Brake Pedal Assy|Specifications|Page 4124
Page 1
background image

Brake Pedal Assy: Service and Repair

Removing and installing

CAUTION:  Brake pedal travel must not be restricted by floor mats.

Note:  Grease all mountings before installing with white lubricating paste, Part No. AOS 126 000 06.

1. Cap
2. Brake fluid reservoir

^

With strainer

^

For vehicles with brake fluid warning indicator contact pin in reservoir

3. Rubber grommets

^

Moisten with brake fluid and press into reservoir.

4. Hex nut, 20 Nm (15 ft. lbs.)
5. Brake master cylinder, 23.81 mm diameter

^

Can not be repaired, replace completely if needed.

6. O-ring

^

Replace

7. Lock washer

^

Check for secure fit

8. Bolt
9. Self-locking hex nut, 25 Nm (18 ft. lbs.)

^

Replace

10. Brake booster push rod clevis
11. Brake booster

^

Before removing, remove Battery and disconnect brake lines

Brake Pedal Assy|Specifications|Page 4126 > < Brake Pedal Assy|Specifications|Page 4124