Eurovan V6-2800cc 2.8L (AES) (2000)
Display will appear as shown
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -4- to select "Basic setting".
-
Press -Q- button to enter selection.
Display will appear as shown
Introduce Basic setting
HELP
Input display group number XX
-
Press buttons -1-, -3- and -0- to select "Display group number 130".
-
Press -Q- button to enter selection.
Display will appear as shown (1 to 4 = Display fields)
Basic setting 130
->
1
2
3
4
-
Raise engine speed to between 2200 and 2800 rpm and check specifications for oxygen sensor aging (before cat).
See Display fields 1 to 4
NOTE:
-
To ensure exhaust gas temperature is within spec during test, maintain test rpm for at least 1 minute.
-
Observe Oxygen control status in Display field 4.
Display Group 15
-
Press -C- button.
-
Press buttons -1-, -3- and -1- to select "Display group number 131" and press -Q- button to confirm entry.
Display will appear as shown (1 to 4 = Display fields)
Basic setting 131
->
1
2
3
4
-
Run engine at idle and check specifications: