Eurovan V6-2800cc 2.8L (AES) (2000)
-
Connect multimeter between terminal 1 of ECM connector and Ground using jumper wires from VW 1594 adapter kit.
-
specification: 11.0 to 14.5 Volts
If again no Voltage present:
-
Check wiring between terminal 1 and fuse/relay panel using wiring diagram.
If Voltage present:
-
Connect multimeter between terminals 2 and B+ of ECM connector using jumper wires from VW 1594 adapter kit.
-
Measure Voltage supply when display group 120, Display field 4, 1st position from left = 1.
-
specification: 11.0 to 14.5 Volts
Measure Voltage supply when display group 120, Display field 4, 1st position from left = alternating 0 and 1
-
specification: between 0.0 and 12.0 Volts and fluctuating
-
Switch ignition off.
If Voltage not present: