Eurovan V6-2800cc 2.8L (AES) (2000)
Clutch: Service and Repair
1ST to 3RD Gear Clutch K1
Replacement
Refer to Unit (Planetary Gearbox) Disassembly/Assembly under Overhaul for the specific component. See: Service and Repair
Disassemble/Assemble
Component Notes And Information
NOTE: During service procedures, refer to the illustration above and the information below.
1
Supporting ring
-
4-piece, unclip from inner plate carrier
-
Installing refer to Fig. 2 below.
2
Inner plate carrier
-
Installing refer to Fig. 4 below.
-
Assembling refer to Fig. 2 below.
3
Circlip
-
Different thicknesses
-
Mark after removing and insert in same position
4
Thrust plate
-
Smooth side faces inner plate
-
Install together with inner plate carrier refer to Fig. 2 below.
5
Inner plate
-
Quantity refer to Code Letters, Application, Ratios, Equipment. See: Application and ID
-
Installing refer to Fig. 2 below.
6
Outer plate
-
Quantity refer to Code Letters, Application, Ratios, Equipment. See: Application and ID
-
Installing refer to Fig. 2 below.
-
Always 1.5 mm thick
7
Outer plate
-
Always 2 mm thick
-
Installing refer to Fig. 2 below.
8
Corrugated washer
9
Circlip