Eurovan V6-2800cc 2.8L (AES) (2000)
/Page-1122001.png)
Final Drive Fluid: Specifications
Tightening Specifications
Differential Check/Filler Plug ............................................................................................................................................................ 20 Nm (15 ft lb)
Left Side Seal and Right Side Seal Up To Dec. 1995
Wheel Bearing Housing To Lower Ball Joint .......................................................................................................... 55 Nm (41 ft lb) + 90° (1/4 turn)
NOTE: Always replace bolt)
Shock Absorber To Axle Link ....................................................................................................................................................... 160 Nm (118 ft lb)
Hex Bolt To Drive Shaft ...................................................................................................................................... 150 Nm (111 ft lb) + 90° (1/4 turn)
NOTE: Always replace bolt)
Bonded Rubber Mounting To Subframe ........................................................................................................................................ 200 Nm (148 ft lb)
Wheel Bolts To Wheel Hub ........................................................................................................................................................... 160 Nm (118 ft lb)
Drive Shaft To Drive Flange .............................................................................................................................................................. 70 Nm (52 ft lb)
Right Side Seal From Jan. 1996
Drive Shaft To Drive Flange .............................................................................................................................................................. 80 Nm (59 ft lb)
Bracket To Engine ............................................................................................................................................................................. 50 Nm (37 ft lb)
Bracket To Flange Shaft Bearing ....................................................................................................................................................... 27 Nm (20 ft lb)
