Eurovan V6-2800cc 2.8L (AES) (2000)
Planetary Gears: Service and Repair
Component Notes And Information
NOTE: During service procedures, refer to the illustration above and the information below.
1
Planet carrier
-
Adjusting. See: Adjustments
2
O-ring
-
Always replace
-
Install in planet carrier
3
Axial needle bearing washer
4
Axial needle bearing
5
Axial needle bearing washer
-
Install smooth side in input gear
6 -Transmission housing with input gear installed
7
Input gear
-
Do not remove to disassemble planetary gearbox
-
Removing and installing input gear or axial needle bearing for planet carrier refer to Differential Input Gear, Replacement. See: Front Final
Drive/Service and Repair
8
Planet carrier shim
-
Determining thickness, refer to Adjusting planet carrier. See: Adjustments
9
Washer
10
Bolt
-
Tighten to: 30 Nm (22 ft lb)
-
For small input shaft
11
Spacer bushing
-
Clip qty. 7 into gasket
12
Gasket
-
Always replace
13
Cover
14
Bolt
-
Tighten to: 30 Nm (22 ft lb)