Eurovan V6-2800cc 2.8L (AES) (2000)
Power Window Switch: Testing and Inspection
Checking "One Touch Up, One Touch Down" Power Window Function
NOTE: Before troubleshooting, "One touch up, one touch down" function should first be reset and activated again! (refer to pervious page).
Prerequisite:
-
S14 Fuse 14 (10A), located on relay-panel, OK !
-
S43 Circuit breaker (30A), located above fuse/relay-panel, OK !
-
Supply voltage (battery-voltage) OK !
Preparation:
-
Enter the vehicle and sit down on driver's seat.
-
Close driver's and passenger's doors.
-
Switch ignition ON.
-
Close windows completely.