Eurovan Camper V6-2.8L (AXK) (2002)
Continuation of test if indication is approx. -40.0 °C:
-
Disconnect 4-pin connector from Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature (ECT) sensor -G2- (arrow)
-
Bridge terminals 3 + 4 of connector using adapter cables from VAG1594 connector test kit, and observe what is indicated on display.
If indication jumps to approx. 140.0 °C:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Replace Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature (ECT) sensor -G2-.
-
Check DTC memory, repair any malfunctions and then erase DTC memory.
If indication remains approx. -40.0 °C:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Check wires according to wiring diagram.
Continuation of test if indication is approx. -40 °C: