Eurovan MV V6-2.8L (AXK) (2002)
6X0953257A IMMO
0001->
Coding 00001 WSC XXXXX
-
Top line
Control module part number
System identification
(Immobilizer)
Version number
-
Bottom line Coding number
Work Shop Code 1)
1) Automatically stored in control module upon access to system.
-
Press -> button.
Indicated on display (Values displayed here are examples only!!):
WVWZZZ70Z1H000054 VWZ1Z0X0264600 ->
-
Top line
Vehicle Identification Number (VIN),
(17-digit, WVW....)
Immobilizer Identification number,
(14-digit, VW....)
If displayed:
Control module not responding!
HELP
-
Press the HELP button to print out an overview of all of the possible malfunction causes.
-
Enter address word 25 for immobilizer again after correcting malfunction and press Q button to confirm.
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Pressing the HELP button will print out an overview of all of the possible functions.
Available functions
01 -
Check Control Module Versions
02 -
Check DTC Memory
05 -
Erase DTC Memory
06 -
End Output
07 -
Code control module
08 -
Read measuring value block
10 -
Adaptation
11 -
Login procedure
NOTE:
-
All possible Immobilizer OBD functions are indicated above. Do not attempt to select additional functions printed out via the HELP button.
-
After function is completed, the VAG 1551 returns to the start position:
Indicated on display:
Rapid data transfer
HELP
Select function XX
Measuring Value Blocks (function 08)
Read Measuring Value Block (function 08)
Measuring value blocks are divided into 3 display groups. Assignment of the individual display fields is found in display group overview.