Eurovan MV V6-2.8L (AXK) (2002)
/Page-1456003.png)
-
Illustration shows seat removed (not required).
-
Lift right side of passenger seat and route CD changer wiring harness under carpet to step cover (allow enough slack in harness for easy installation
to CD changer).
-
Remove philips head screw from front of step cover (arrow).
-
Route harness under step cover (near the lip) to the A-pillar.
-
Route harness beneath carpet, up to the A-pillar.
-
Reinstall step cover screw.
-
Remove radio (see VESIS Group 91, Radio, removing and Installing). Do not disconnect connectors.
-
Route harness along passenger side of instrument panel through to radio opening as shown.
-
Connect harness to back of radio.
-
For Premium radios: remove single terminal on CD harness (brown wire).
-
Install Part No: 000 979 137 (eyelet connector) from VAS 1978 Wiring Harness Repair Kit to brown wire using a red wire splice.
-
Remove snubber from threaded stud on back of radio.
