Eurovan MV V6-2.8L (AXK) (2002)
-
The following test sequences are described for VAG1551 scan tool.
On Board Diagnostic (OBD), Initiating
On Board Diagnostic (OBD), Initiating
-
Connect scan tool.
NOTE:
-
The following test sequences are described for VAG1551 scan tool.
-
Additional operating instructions can be called up with the scan tool HELP button.
-
The -> button serves to advance the program sequence.
-
In the operating mode 1 "Rapid data transfer" the function OO "Automatic test sequence" can be carded out. Then all vehicle control units will be
checked automatically.
-
Switch on ignition.
-
Switch on printer with the PRINT button (indicator lamp in button lights up).
Indicated on display:
Rapid data transfer
HELP
Input address word XX
-
Press buttons -5- and -6-. "56" enters the address word "Radio".
Indicated on display:
Rapid data transfer
Q
56 Radio
-
Confirm entry with Q button.
Indicated on display:
Rapid data transfer
Q
Tester sends address word 56
Check Control Module Versions (Function 01)
Check Control Module Versions (Function 01)
Indicated on display:
1J0035186B Radio 0001 ->
Coding 06201 WSC 00000
-
Top line
System designation
Part No. of control unit
(Radio)
Version number
-
Lower line Code number
Dealership number(1)
1) Will be automatically stored in the radio unit when entering the system.
Indicated on display of radio system during On Board Diagnostic (OBD):
DIAG.
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP