Eurovan MV V6-2.8L (AXK) (2002)
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -3-. 03 selects the "Output Diagnostic Test Mode" function.
Indicated on display
Rapid data transfer
Q
03-Output Diagnostic Test Mode
- Confirm entry with -Q- button.
Indicated on display:
Rapid data transfer
->
Loudspeaker
The loudspeakers are tested with a test current.
If a loudspeaker circuit is recognized by the system as defective then a code is stored in the DTC memory.
-
Press -> button.
Indicated on display:
Output Diagnostic Test Mode
->
END
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -2-. The function "Check DTC Memory" is selected with 02.
Indicated on display:
Rapid data transfer
Q
02 check DTC Memory
-
Confirm entry with -Q- button.
The number of stored codes appears in the display.
X DTC recognized!
-
Service wiring or loudspeaker if necessary, erase DTC memory and repeat Output Diagnostic Test Mode.
-
Finally "End output".
Selectable Functions When Using VAG 1551/1552 or Vas 5051
List Of Selectable Functions
01 ......................................................................................................................................................................................... Check Control Module Version
02 .......................................................................................................................................................................................................... Check DTC Memory
03 ............................................................................................................................................................................................ Output Diagnostic Test Mode
05 ........................................................................................................................................................................................................... Erase DTC Memory
06 ......................................................................................................................................................................................................................... End Output
07 ......................................................................................................................................................................................................... Code Control Module