Eurovan MV V6-2.8L (AXK) (2002)
13
-
Molded trim
-
Removal:
- Press trim - 16 - upward and unlatch.
- Remove recessed screws - 15 - and unhook strap.
- Pry out spreader pins - 4 -, unclip trim left side - 3 - and frame trim right side - 1 -.
- Remove recessed screws - 10 -.
- Pull molded trim away from tailgate slightly in lower area and push upward out of brackets - 12 -.
-
Installation:
- Spread brackets - 12 - => fig. 1
- After mounting molded trim, pull wedge aids out of bracket - 12 -.
14
-
Strap
-
Removal:
- Remove recessed screws - 15 - and unhook strap from mounting hole.
15
-
Recessed screw
-
Two, one on each side
16
-
Trim
-
Removing: push upward and unlatch
Fig. 1
Spreading
brackets
-
Spread brackets - 1 - with self-made wedges - 2 - (wood or plastic).
-
Mount molded trim - 3 -.
-
Remove wedges - 2 -, or allow them to drop out when molded trim is mounted.