Eurovan MV V6-2.8L (AXK) (2002)
15
-
Spacer
16
-
Phillips screw
-
with washer and cap
17
-
Rear side molded trim
Molded Trim, Rear Side Wall, Sliding Door Side (With Passenger Compartment Ventilation A/C
System) Overview
Molded Trim, Rear Side Wall, Sliding Door Side (Vehicles With Passenger Compartment Ventilation / Air Conditioning System), Assembly
Overview
1
-
Gasket
-
After installing trim ensure gasket is seated properly.
2
-
Clip
-
Two parts
-
During installation, install sleeve in C-pillar attachment hole and pin in trim.
3
-
Clamp
-
Several located along window edge.
4
-
Rear side wall molded trim
5
-
Clip
-
On reverse side
-
Several along edge of window
6
-
Plug
7
-
Cover for guide wedges
8
-
Phillips screw
9
-
Cover
10
-
Plug
11
-
Phillips screw