Eurovan MV V6-2.8L (AXK) (2002)
-
Remove right upper B-pillar trim.
-
Remove coat hook cap and/or Phillips screw underneath.
-
Remove coat hook.
-
Unclip trim in following sequence:
-
Along molded headliner (arrow - A -)
-
Along door guide rail (arrow - B -)
-
Center bottom C-pillar, clip - 1 -
-
Right side, below arrow - C -
-
Left side, above arrow - D -
NOTE: When gluing trim in window areas (arrow - D -), unclip a little at a time while supporting trim from the back with your hand or lever tool
80-200.
C-pillar trim (right), installing
-
Place trim in installed position while ensuring correct positioning of clips - 1 -.
-
Clip trim onto C-pillar in window areas (arrow - D -) and into spring clips on headliner (arrow - A -).
-
Ensure correct gasket positioning (arrow -C-).
D-Pillar Trim, Components
D-pillar Trim, Components