Eurovan MV V6-2.8L (AXK) (2002)
ABS Light: Testing and Inspection
Bosch 5.0
Malfunction indication via indicator lamp for level control system -K134- and brake and parking brake warning light -K7-
Warning lamps
ABS Warning Light -K47-
^
If the ABS Warning Light -K47- (item no. 1) does not go out after the ignition is switched on and the test sequence is complete, it could be caused
by the errors:
-a- voltage supply is under 10 volts.
-b- there is a malfunction in the hydraulic control module; ABS system is therefore not operating.
The ABS system remains switched off during an ABS malfunction -b-, but the traditional brake system remains fully functional.
-c- there was a periodic wheel speed sensor malfunction since the last vehicle start.
-d- there is an open circuit in the connection from ABS Warning Light -K47 to ABS control module (w/EDL) -J104-.
-e- ABS Warning Light -K47- is malfunctioning
ABS Warning Light-K47- and brake and parking brake warning light -K7-