Eurovan MV V6-2.8L (AXK) (2002)
-
Using wedge 3409, insert inner sealing lip into cylinder groove.
NOTE: Hold piston in front of caliper housing while inserting sealing lip.
-
Press piston into brake caliper housing using piston resetting tool.
NOTE: The protective seal outer sealing lip will then locate in the piston groove.
Replacement
Component Notes and Information
NOTE:
^
During service procedures, refer to the illustration above and the information below
^
After servicing calipers, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal
operating position.
^
To remove brake fluid from the reservoir use a bleeder bottle which is used only for brake fluid
WARNING: Brake fluid is poisonous.