Eurovan MV V6-2.8L (AXK) (2002)
/Page-465003.png)
-
1) The quantity of coolant can vary depending upon vehicle options.
-
Fill coolant up to the max. marking at expansion tank.
-
Close expansion tank.
-
Switch A/C system and heater off.
-
Start engine and maintain an engine speed of about 2000 RPM for approximately 3 minutes.
-
Allow engine to idle until lower coolant hose at radiator is hot.
-
Check coolant level and top-off with coolant if necessary. With engine at operating temperature, coolant level must be at max. marking, with
engine cold, it must be between min. and max. marking.
