Eurovan MV V6-2.8L (AXK) (2002)
WARNING!
Do not open refrigerant circuit for A/C system.
-
Observe additional notes and repair work.
Continuation for all vehicles
-Remove radiator grill
-
Unscrew mounting bolts for lock carrier -1- at left and right.
-
Unbolt expansion tank from lock carrier and set aside.
-
Fold out lock carrier and cooler toward front (arrow).
-
Unbolt hydraulic line -1- of power steering at radiator and set aside.
-
Disconnect connector from thermal switch and radiator fan.
Note:
Mark connectors before disconnecting connectors to radiator fan.
-
Now disconnect connector to right coolant fan -V35- and coolant fan -V7-.
-
Drain engine coolant.
-
Remove coolant hoses from radiator.
-
Lift out radiator complete with intake air elbow and fan upward.
Installing
Installation is reverse of removal, noting the following:
-
Install ribbed belt.
-
Top up coolant.
-
Check headlight adjustment, correct if necessary.
Additional notes and assembly steps for vehicles with A/C system
WARNING!
Do not open refrigerant circuit for A/C System.