Eurovan MV V6-2.8L (AXK) (2002)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
Components In Enggine Compartment Servicing Climatronic
Climatronic Components In Engine Compartment, Servicing
CAUTION! Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair
Manual and/or Owner's Manual.
NOTE: System components identified with an * must only be serviced or replaced after discharging refrigerant system. Use Kent Moore ACR4 or
equivalent.
A/C cut-out thermal switch -F163- and Third Speed Coolant Fan Control (FC) Thermal Switch -F165- engine code AES & AXK, removing and
installing
WARNING!
Cooling system is pressurized when engine is warm. Before performing repairs, wear gloves, goggles and other appropriate protection while slowly and
carefully releasing system pressure.
-
Refill with coolant after replacing switch.
1
-
Clip
2
-
Thermostat housing
3
-
0 ring
4
-
A/C cut-out thermal switch -F163- & third speed coolant fan control (FC) thermal switch -F165-
5
-
Engine coolant temperature (ECT) sensor -G2- & after run coolant fan control (FC) -F87.
6
-
Engine coolant temperature (ECT) sensor -G62-