Eurovan MV V6-2.8L (AXK) (2002)
-
Remove securing bolts (arrows) from cover piece and remove cover piece.
Note: Bracket -1- and -2- must be removed first.
-
Now remove thermostat housing, Cooling system components (on engine).
-
Remove exhaust camshaft adjuster first.
Note: Only counter-hold at camshaft using spanner wrench (32 mm) (arrow). T10068 must not be inserted when tightening or loosening camshaft
adjuster.
-
Remove camshaft adjuster together with camshaft roller chain from intake camshaft.
-
Place camshaft roller chain on side.
-
Remove control housing from cylinder head (arrows).
-
Carefully remove control housing from sealing rings of camshafts.